Category: STB 62FC-Series 1/2" x 1/2" Tilt Balances and Accessories
STB Window Channel Balance, Tilt, Stamped 21B - 21"
SKU: 62FC-21B
UPC:
Product Details:
Please, note, these balances are made to your
order; they cannot be returned for refund or credit; the lead time
is approximately two to three weeks.
Actual size is 17/32" (height) x 9/16" (width),
but considered 1/2" x 1/2". Please, note that the 1/2" channel
height is smaller than the usual 19/32" height on standard
balances.
Channel Length: 21 in
Stamped Number: 21B
Vent Weight: 10 -14
Pounds
Tilt Window Channel Balance
Stamped Number: 21B
Sash Weight: 10 - 14 lbs.
Balance Length: 21"
Balance Depth: 17/32"
Balance Width: 9/16"
(Considered 1/2" x 1/2". Please note that the 1/2" channel height
is smaller than the usual 19/32" height on standard balances)
Balances must be shipped with a separately
ordered end bracket:
60-518 or
900-18354. Order cannot be processed if no end bracket is
included.
Ordering Information:
1. Measure metal channel length (do not include any attached
ends)
2. Identify number stamped on channel
3. Select our corresponding part number
4. Identify the appropriate end bracket, to be attached, out of the
following:
60-518 or
900-18354.
* Balances must be ordered with end brackets; any orders placed
without end brackets will not be processed.
5. If the letter "T" appears after the number stamped, it indicates
a top sash balance. When ordering, please specify in the Comments
section, that your original balance has a "T" stamped on it.
For
Help on "How to Order Window Channel Balance" click this
link.
Additional Ordering Information:
Note: Old Manufacturer (Jim Walters) of this series balances
stamped it with a four digit number (e.g. 2130). These balances are
no longer manufactured with this stamping. To identify your balance
and match up properly with the new manufacturer's balances, you
must take the following steps:
1. Measure the exact length of your channel
2. Identify the weight range your require. Weighing your sash is
the only way to get the exact weight range required. The old
balance with the four-digit number has a different weight range
that the new balances.
3. Select corresponding part number
4. Identify the appropriate end bracket, to be attached to the
balance
While each balance is packaged and
sold individually, it is our recommendation that both balances in
the window be replaced at the same time. This will restore the sash
to a near new condition, and prolong the life of the
window.
- Before ordering, make sure the length and
stamped numbers on the channel being replaced match the length and
stamped numbers in our web catalog. If you do not see a match to
your balance, or are having trouble identifying your balance, you
may contact us and we will try to help identify the correct
replacement for your balance.
Please note: These balances are
made-to-order. There may be a 3 - 4 week lead time. These balances
cannot be returned or refunded.
"SPECIAL ORDER ITEM - NON-REFUNDABLE,
NON-RETURNABLE."