Tilt Window Channel Balance
Stamped Number: 16H
Sash Weight: 28 - 31 lbs.
Balance Length: 16"
Balance Depth: 17/32"
Balance Width: 9/16"
(Considered 1/2" x 1/2". Please note that the 1/2" channel height is smaller than the usual 19/32" height on standard balances) Balances must be shipped with a separately ordered end bracket: 60-518 or 900-18354. Order cannot be processed if no end bracket is included.
Ordering Information:
1. Measure metal channel length (do not include any attached ends)
2. Identify number stamped on channel
3. Select our corresponding part number
4. Identify the appropriate end bracket, to be attached, out of the following: 60-518 or 900-18354.
* Balances must be ordered with end brackets; any orders placed without end brackets will not be processed.
5. If the letter "T" appears after the number stamped, it indicates a top sash balance. When ordering, please specify in the Comments section, that your original balance has a "T" stamped on it.For Help on "How to Order Window Channel Balance" click this link.
Additional Ordering Information:
Note: Old Manufacturer (Jim Walters) of this series balances stamped it with a four digit number (e.g. 2130). These balances are no longer manufactured with this stamping. To identify your balance and match up properly with the new manufacturer's balances, you must take the following steps:
1. Measure the exact length of your channel
2. Identify the weight range your require. Weighing your sash is the only way to get the exact weight range required. The old balance with the four-digit number has a different weight range that the new balances.
3. Select corresponding part number
4. Identify the appropriate end bracket, to be attached to the balance
While each balance is packaged and sold individually, it is our recommendation that both balances in the window be replaced at the same time. This will restore the sash to a near new condition, and prolong the life of the window.
- Before ordering, make sure the length and stamped numbers on the channel being replaced match the length and stamped numbers in our web catalog. If you do not see a match to your balance, or are having trouble identifying your balance, you may contact us and we will try to help identify the correct replacement for your balance.
Please note: These balances are made-to-order. There may be a 3 - 4 week lead time. These balances cannot be returned or refunded.
"SPECIAL ORDER ITEM - NON-REFUNDABLE, NON-RETURNABLE."