Product Details:
Hemmed Non-Tilt Window Channel Balance
Stamped Number: 10-1
Sash Weight: 3-5 lbs.
Balance Length: 11"
Balance Depth: 5/8" - considered 1/2" in the trade
Balance Width: 19/32"
Before ordering, make sure the length and stamped numbers on the
channel being replaced match the length and stamped numbers listed
above.
Ordering Information:
1. Measure the metal channel length (not including any attached
ends), width, and height
2. Identify the number stamped on the metal channel
3. Select the corresponding part number
4. Identify the appropriate Top and Bottom Guides
For Help on "How to
Order Window Channel Balances" click this
link.
Top and Bottom Guides may be purchased attached to the balance
or unattached;
if you would like them attached, please make sure to order guides
with the suffix "A".
Please note: 60-Series and 61-Series
top guides are interchangeable; however, the
bottom guides are not.
Please select the correct bottom guide only from the 61-Series
bottom guides.
Top Guides:
Window Channel Balance Top Guides, Attached
Window Channel Balance Top Guides, Unattached
Bottom Guides:
Window Channel Balance Bottom Guides, Loose and Attached
One balance per package; ends must be purchased separately.
Please remember, balances purchased with the guides attached cannot
be returned for refund or credit.
Whenever replacing Window Channel Balances be sure to check the
guides, take-out clips, sash cams and terminal clips, as age and
weathering can make plastic and nylon parts brittle and worn. Even
metal parts will show fatigue with constant use, so be sure to
inspect them also.
"SPECIAL ORDER ITEM - NON-REFUNDABLE,
NON-RETURNABLE."