Relton SMX-18S Solid-Body Hard-Head Bits SDS-Max Shank Pilot for 1-1/8" thru 1-5/8" Heads - 18" Drilling Depth

Relton's "Hard-Head" bits are designed to bore large holes through concrete without the need to break out the core every few inches.

Directions: Slide the taper end of the shank into the "hard-head" bit. A slight twisting motion will help keep the bit from falling off before beginning the cut. The pilot is intergrated on the shank, this way drilling can be accomplished with no interruption! Once used, the shank and head will become one piece.

Drilling Depth: 18"
Shank Style: SDS-Max

Minimum Order: 1 Each

Note: Listing is for Shank/Pilot ONLY