Product Details:
- Excellent Primerless Adhesion to Most Common Construction Substrates
- ±50% Joint Width Movement
- Approved for the Florida Hurricane Impact Glazing Code*
CRL 95C Silicone is a one part, medium modulus, neutral cure, 100% silicone formulation that cures to a durable and flexible silicone rubber building joint seal. It can accommodate ±50 percent joint movement in properly designed joints. Designed for sealing expansion and control joints in precast concrete panels and metal curtainwalls; non-structural glazing of glass, metal and plastic, as well as waterproofing applications, including perimeter sealing of doors and windows. CRL 95C forms a durable, flexible watertight bond with most building materials in any combination of glass, ceramics, plastics, stone, masonry, wood, steel, anodized and mill-finished aluminum, and painted surfaces. In most cases, no primer is required. CRL 95C is compatible with all laminated glass, insulating glass units, and acrylic or polycarbonate glazing sheets. CRL 95C can be used as a weather seal for insulating glass units produced with any type of sealant, including two-part silicones, polysulfides, polyurethane and butyls. CRL 95C can be applied at outdoor temperatures as low as -20°F (-29°C), provided that surfaces are clean, dry and frost-free or on surfaces as high as 130°F (54.4°C). Cured sealant will perform at cold temperatures down to -80°F (-62°C) or at high temperatures up to 350°F (177°C). In order to help you better select the correct sealant, we have put together a Silicone and Sealant Selector Chart. You need to have Adobe Acrobat Reader installed in order to view this chart. You can download this Free software on the Adobe.com website by going HERE.
- Color: White
- Contents of Cartridge: 10.3 fl oz (305 ml)
- Shelf Life: 12 months
* Successfully tested by manufacturers with systems approved for the Florida Hurricane Impact Glazing Code and recommended as an installation sealant. NOTE: Each manufacturer must test for use in their systems and have the results independently verified.Available in
Custom Colors. Minimum and multiple quantities for custom color offerings are 1,200 cartridges, forty-four 2 gallon (7.5 liter) pails, or twenty-two 4.5 gallon (17 liter) pails (±10 percent). Lead time is five to six weeks.
Technical Data: CRL 95C meets or exceeds the requirements of the following specifications: TT-S-001543A (COM-NBS) for silicone building sealants Class A; TT-S-00230C (COM-NBS) for one component building sealants as Class A, Type II; ASTM-C920 Standard Specification for Elastomer Joint Sealants as Type S, Grade NS, Class 50, Use NT, G, A, M, & O; CAN/CGSB-19.13-M87. 95CBL (black) meets all of AAMA 802.3-92 (Type I and II), 805.2-94 (Group C), and 808.3-92. Meets California Air Resources Board 2003 requirements for Volatile Organic Compound (VOC) content. Qualifies for LEED (Leadership in Energy and Environmental Design) credit.
Comparable Sealants:Dow Corning® 795, 790, 791 Silicones
Tremco® Spectrem 1, Spectrem 2, Spectrem 3 Silicones
GE® SilPruf 2000, UltraPruf II 2900, SilPruf LM 2700 Silicones
Pecora® 864, 895 Silicones
Sonneborn® OmniSeal Silicone
Packaging: 30 - 10.3 fluid ounce cartridges per case; 1440 cartridges per pallet. Press-in hand holes in each case for easier lifting. "WHMIS" Safety Label on cartridges and cases.
Warranty: CRL 95C has a 20 year limited warranty. Once applied and thoroughly set up, CRL 95C Silicone Building Sealant is warranted to stay flexible for at least 20 years, when properly applied and used under normal conditions.