Product Details:

Easy to apply
Non-gassing, non-exuding, and non-absorbing
Compatible with virtually all known cold applied sealants
Closed cell bi-cellular polyolefin foam
Chemically inert, virtually dust-free, does not stick to sealants

Meets all requirements of the 1990 Clean Air Act

Is a "Domestic End Product" as defined in the Buy American Act, Title 41 USC 10

Sof rods are designed to limit the depth of sealants, help the sealant assume an hourglass shape (which prolongs sealant life), and serve as a bond breaker to prevent bottom-side adhesion.  Sof rods do not stain sealants, and are chemically inert.  They are non-gassing, non-exuding, and virtually dust-free.  Due to physical and chemical inert nature, sof rod is compatible with virtually all known cold sealants, including self-leveling sealants - butyl, polysulfide, acrylic polyurethane, silicone, and most other cold-applied sealants

Diameter of Rod: 3/8"
Length of Roll: 1400ft

Joint Preparation and Installation:
Clean all joints. Remove any concrete form-release agents, curing compound residue, laitance, and any other foreign materials.
To ensure good bond, joints must be clean and dry when the new sealant is installed. Air compressors must be equipped with traps for oil and moisture removal.
Install sof rod at depth recommended by sealant manufacturer - use a blunt tool.

Common Applications:
Expansion and Contraction Joints
Window Glazing
Curtain Wall Construction Partitions
Parking Decks
Bridge Construction
Modular Home Gasketing
Log Home Chinking