CRL V-Notch Nozzle Cutter
C.R. Laurence CRL V-Notch Nozzle Cutter | VNT306
Category: CRL Nozzle Caulking Tool Accessories
CRL V-Notch Nozzle Cutter
SKU: VNT306
UPC:

$174.34 (20% off)

$145.28

Product Details:

Cuts Perfect V-Shaped Notches in Nozzles
Safest Way to Trim V-Notches

This CRL V-Notch Cutter is the quickest and safest way to trim your nozzles. Cutting the proper V-Notch on a urethane cartridge nozzle can be difficult and dangerous if you do not use the proper tool. The CRL V-Notch Cutter is a high quality tool that comes with tempered steel jaws, a spring loaded handle with non-slip plastic grips, and a thumb controlled jaw locking device.

Size of V-Notch: 7/16 x 3/4 in (11 x 19 mm)

Minimum Order: 1 Each
To use this tool, take a utility knife and cut the end of the nozzle tip to give yourself a 1/4 inch (6.4 millimeter) or larger bead. Next, insert the CRL V-Notch Cutter tool inside the nozzle. Squeeze the handle and you have a perfect V-Notch. To correctly set the height of your V-Notch, place the nozzle (with a pre-cut end) on the pinchweld. Mark the height of the body panel on the nozzle and trim to that height. This will prodvide you with the proper height for compression of the urethane bead.