Easily Permits Standoff Cap Assemblies to be
Tightened or Loosened
Can be Used for Either 1-1/2" or 2" (38.1 or 50.8 mm) Standoff Cap Assemblies
The CRL Standoff Wrench for
1-1/2
and 2 Inch
Cap Assemblies was specifically designed to be used during installation of
the CRL Standoff Display System. The curved end of the Wrench fits around the
Standoff Cap and into the slot in the edge, allowing the Cap to be easily
tightened or loosened.
Minimum Order: 1 Each
One each per package.