Product Details:
- Available in Many Attractive Finishes
- Narrow Extrusion Face Allows Increased Mirror
Visibility
- Custom Made to Your Exact Specifications
|
This CRL Custom Aluminum Mirror Frame
is available in many attractive finishes that will match virtually
any decor. The entire assembly and mounting process takes only
minutes because your custom frame has been fabricated to exact
specifications and tolerances. The frame ships with applicable
screws which is all that is required for assembly. The frame is
fabricated so that the screw holes are on the top and bottom
members of the frame (Type "B" above) or on the
side members (Type "S" above). The mirror must be
cut 5/16 inches (7.9 millimeters) less in width and height than the
outside dimensions of the frame.
This mirror frame is not supplied with glazing vinyl. You can apply
a small bead of silicone in each corner to secure mirror inside the
channel.
If you would prefer a Shelf attached to your Custom Mirror Frame,
you can order a D1984 Mirror
Frame with Shelf.
To Order:
- Specify Frame Model
- Specify Finish Required
- Specify Outside Frame Measurements (Width by Height)
- Specify Screw Type
The smallest frame size is 12 by 12 inches (304.8 by 304.8
millimeters) and the largest is 24 by 36 inches (609.6 by 914.4
millimeters).