Heavy-Duty Stainless Steel Handle
Fast Attachment on Smooth, Nonporous Flat Surfaces
Tough ABS Plunger With Red-Line Indicator
Full Pad Face Contact When Pumped Reduces Distortion
Can Be Re-Pumped Without Losing Remaining Vacuum
Wide Release Valve Lever With Safety Guard Permits Quick and Complete Release
CRL has developed the S7950 8" (203 mm) Pump-Action Vacuum Lifter with
the strength of a heavy-duty stainless steel handle and a tough ABS 3-stroke
Plunger Pump for extra-fast attachment to glass and other non porous surfaces.
The Plunger uses a red-line indicator to let you know that you have sufficient
vacuum to lift your load. Should the red-line appear after pumping, a built-in
check valve allows you to re-pump without vacuum loss.
Pad Area: Over 50 Square Inches
Additional Product Information:
The large rubber pad area of over 50 square inches (323 square centimeters)
makes full face contact when the Lifter is pumped, and allows attachment to
glass of varying thickness with very little risk of damage.
To release the S7950 Lifter from the surface, simply press the vacuum release
lever (which is protected by a guard during use) and the pad detaches from the
surface without any residual sticking. Four 5/16" (7.9 mm) diameter holes in the
handle are convenient locations to attach guide ropes when using these Vacuum
Lifters mounted on one of CRL Manual Lifting Frames, as well as for other
utility attachments.
Important Notes:
Lifting Capacity 125 lb. (57 kg)