Physically Handicapped 8.5 Lb. Opening Force for
Compliance With ADA Accessibility Requirements
Selective On or Off Hold-Open
Built-in Positive Dead Stop
This CRL Rixson® Model PH27 Offset Floor Mounted
Door Closer provides the best mechanical means of controlling a door. The weight
of the door is supported by the bottom arm, which is directly connected to the
floor closer spindle. The direct connection between the bottom arm and the floor
closer spindle creates a tremendous increase in closing efficiency compared to
surface or overhead concealed closers.
This closer complies with guidelines
established in the American With Disabilities Act (ADA), 8.5 pound* opening
forces for handicap accessibility when used with 36 inch (914 millimeter) wide
doors. This closer is capable of supporting exterior or interior doors weighing
up to 350 pounds (158 Kg.)
Minimum Order: 1 Each
Additional Product Information:
Standard features include selective on or off hold-open, build-in positive dead
stop, and separate independent valves for closing, latch and back check
adjustments.
Optional accessories that may be needed:
253000 Floor Closer Cement Case
274750RH
Closer Cover
252050RH
Bottom Offset Arm
R180
Top Offset Pivot
M19RH
Intermediate Offset Pivot
* NOTE: Although the PH Model Closer complies
with barrier-free opening force restrictions, it can not be guaranteed that
adequate closing force will be obtained.