Compact Design With Base, Cap, and Mounting Stud
For Use With 1/2" and 3/4" (12 and 19 mm) Tempered Glass Applications
Brushed or Polished 316 Grade Stainless Finishes Available
Designed for Steel, Aluminum, and Concrete Substrates
These heavy-duty CRL Glass Rail Standoffs
are designed to work along with hand or guard railings. The standoff fitting is
2 inches (51 millimeters) in diameter and 1-3/4 inches (44.5 millimeters) in
length and comes with a 3/8 inch - 16 x 2 inch (51 millimeter) Allen Stud for
mounting, along with necessary rubber washers and grommet. Use Spanner Wrench
Cat. No. SSW12 to tighten the cap.
Fabricated with #316 grade stainless steel in
brushed or polished finishes.
Color: Polished Stainless
Glass Fabrication: One 3/4" (19 mm) Hole Per Fitting
Diameter: 2 in (51 mm)
Length: 1-3/4 in (44.5 mm)
Specifications:
For use with 1/2 inch or 3/4 inch (12 or 19 millimeter) Tempered Glass.
Glass Fabrication:
one 3/4 inch (19 millimeter) hole per fitting.
Spacing:
Maximum horizontal spacing between fittings on hand or guard rail applications
is 24 inches (609 millimeters) center-to-center and minimum height is 4 inches
(101.6 millimeters) center-to-center.
Important Note:
Use with tempered glass only. Do not use with raw or annealed glass.