Available Locking and Non-Locking Models
Accepts 5/8" (16 mm) Throw Bolt
This CRL Dust Proof Keeper with Mounting Plate works with our 777S Door Rail
Floor Lock and our AMR205A Patch Lock. Accepts 15/32 inch (12 millimeter)
plunger from these or similar devices. Keeper is packed with two Flat Head
Screws. Requires 1 inch (25 millimeters) diameter hole drilled 2 inches (51
millimeters) deep into floor.
Color: Polished Stainless
Length of Mounting Plate: 2-7/8 in (73 mm)
Width of Mounting Plate: 1-3/8 in (35 mm)
Minimum Order: 1 Each
Additional Product Information:
Fabrication Required:
One inch (25 millimeters) diameter hole drilled two inches (51 millimeters) deep
into floor and two holes for #10 screw anchors.