CRL Polished Brass Finish Top Door Patch Fitting with INT303 Insert
C.R. Laurence CRL Polished Brass Finish Top Door Patch Fitting with INT303 Insert | PH20ABR
Category: CRL Top Door Patch Fitting with Insert No. 1NT303
CRL Polished Brass Finish Top Door Patch Fitting with INT303 Insert
SKU: PH20ABR
UPC:

$84.44 (20% off)

$70.37

Product Details:

For 3/8" or 1/2" (10 or 12 mm) Glass

The CRL Top Door Patch Fitting includes the 1NT303 Insert for use with our CRL9040WBP Top Walking Beam Pivot, 1NT401 Surface Mount Top Pivot, 1NT405 Threaded Top Pivot, or other 19/32 inch (15 millimeter) Diameter type pivots. Finished covers are available in five standard finishes. Gaskets are supplied that allow this Patch Fitting to be used with either 3/8 or 1/2 inch (10 or 12 millimeter) Glass.


Color: Polished Brass

Minimum Order: 1 Each

Additional Product Information:
Glass Fabrication Required: One 3/4 inch (19 millimeter) diameter hole and corner notch.
Important Note:
THE FOLLOWING GUIDELINES ARE TO BE USED WHEN MAKING A DOOR USING THIS HARDWARE:
MAXIMUM HEIGHT: 108" (2744MM)
MAXIMUM WEIGHT: 176 LBS (80KG)
MAXIMUM WIDTH: 43" (1100MM)
IF THE DOOR EXCEEDS ANY OF THESE LIMITATIONS FULL DOOR RAILS SHOULD BE USED.