- Holds All 1/4" Hex Insert Bits
- Low Profile Angled Head
- Removable from Handle for Use in Power Driver
|
The CRL Offset Bit Driver lets you fasten or remove screws located in channels, under wedges, or in areas where any regular screwdriver cannot fit. The low profile, angled head has hardened steel gears that are lubricated and sealed for a lifetime of service. The standard 1/4 inch (6.4 millimeter) hex socket securely holds, all types of 1/4 inch (6.4 millimeter) Hex Insert Bits.
The CRL Offset Bit Screwdriver has a 360º degree adjustable thumb flange with split-fit action that quickly rotates to any position, allowing you to apply maximum force and giving you complete control. The hardened plastic handle has storage area for the #1 and #2 Phillips and 3/16 inch (4.8 millimeter) and 1/4 inch (6.4 millimeter) slotted bits that come with it.
Do not use as a pry bar or chisel. Internal damage to the mechanism may result. Do not use wrenches, extenders, or pliers to hold or turn the speed gear housing. Maximum recommended torque input is 150 in-lbs.