- Compatible with Edgetech *Super Spacer* and Can Also Be Used with Adsorbent Filled Aluminum Spacers
- Low Moisture Vapor Transfer Rate
|
CRL N600 2-Part Polyurethane is an effective edge seal used for fabricating insulating glass units. Both components, base material and activator, with a net yield of one and a half gallons (5.7 liters), are packaged in a two gallon (7.6 liters) pail.
Best when mixed by weight, when using only as much as you need. Proportioning mixing ratio by weight is 14.8 to 1. Mix with a portable drill mixer (Cat. No. MX40 or MX91), and apply with a flexible blade putty knife. N600G15 contains no solvents, allowing it to be used safely with Super Spacer. Set time is three hours when properly mixed.
One each part A and B per pail is the minimum order.
I.G. units should be totally sealed with N600G15 within one hour of exposing Super Spacer adsorbent to the atmosphere.