
"GE" Center-Hung,
Side-Load Hardware Package for Doors with 1/2" Deep Top Rails
Suitable for Doors From 30 to 42 Inch (762 to 1,069 mm) Wide
Door Closers Cross Reference Chart
The CRL GE Overhead Closer Package consists of a Medium Duty Door Closer
suitable for doors from 30 to 42 inches (762 to 1,069 millimeters) wide. The
Closer is packaged complete with CRL8010FS Mounting Clips, CRL8010S "S" Side
Load Arm, CRL8010GE "GE" Adjustable Threshold Mount Bottom Pivot Set and
complete installation instructions.
The Closer has dual independent valves for closing operation (one valve for closing, one valve for latching).
90º and 105º Hold Open and No-Hold Open models are available.
Closers fit into standard 1-3/4 x 4 inch (44.5 x 101.6 millimeter) (or larger) header extrusions.
Closer Body Length: 11-5/8 in (295 mm)
Closer Body Width: 3-11/16 in (94 mm)
Minimum Order: 1 Each
Important Note:
This Door Closer is not to be used for doors weighing in excess
of 200 Lbs.