Installs Directly Onto Glass Up to 1/2" (12 mm) Thick
Requires a 1-1/4" (32 mm) Hole
Excellent for any sliding glass door, the CRL Sliding Glass Door Keymatic Plunger Lock is installed directly onto glass with plunger resting against edge of back sliding door. A 1-1/4 inch (32 millimeter) hole must be drilled in the front sliding door to accept the lock. This lock will work in doors up to 1/2 inch (12 millimeters) thick. A captive operation system allows the key to be removed only in the locked position. Accessories for this lock include the glass cover plate, donut rings, plastic insert washers and (4) 1/2 inch (12.7 millimeter) long screws. Minimum order is one each.
Color: Polished Nickel
Minimum Order: 1 Each