A Must for Determining Urethane Cure Rates
Measure Temperature and Humidity Levels at Installation Site
Use with Urethanes Manufacturer's Cure Rate Charts for Safe Drive Times
The CRL Humidity/Temperature Pen has fast
response solid-state sensors which continously and simutaneously display both
Relative Humidity and Air Temeprature (ºF/ºC) with a dual-recall memory. The
large, 1/2 inch (13 millimeter) LCD memory display registers the highest and
lowest humidity/temperature achieved during any time period.
Minimum Order: 1 Each
Temperature range is 32.0 to 122.0ºF (0.0 to 50.0ºC), with a resolution of 0.1º
and an accuracy of ± 1ºC. Relative humidity range is 2 to 98%, with a resolution
of 1% and an accuracy of ± 2% (mid range) to ± 4% (end-of-range). The display
shows changes in less than 30 seconds, and is updated every second. This is an
indispensable tool for any installer. Supplied with two silver-oxide batteries
1039RB.
One per package.