Easy to Use with No Mess or Waste
Instant Grab with No Curing Time Before Hanging Mirror
Perfect for Small Mirror Installations Such as Bathroom Vanity Mirrors
CRL Gunther EZ Stic Mirror Adhesive Pads are a new and innovative adhesive system for mirror installations. Easy to use, simply remove pads from box, apply to wall, remove release paper and install mirror. EZ Stic Pads immediately grab the mirror and substrate. No need to wait for curing times of typical mastics. Primarily designed for bathroom vanity mirrors which do not exceed 36 inches (914 millimeters) in height.
Pad Diameter : 3 in (76 mm)
Pad Thickness: 3/16 in (4.76 mm)
Minimum Order: 1 Case (150 pads)
Additional Product Information:
EZ Stic Pads provide excellent adhesion to a variety of substrates including: glass, mirror, acrylic mirror, mirror safety backing, ceramic tile, aluminum, painted surfaces and wood. The pads remain flexible, yet hold firmly as they absorb any movement for the life of the application. EZ Stic Pads will not get brittle with age or desilver electro-copper plated or acrylic mirrors. Saves time because there's no need for caulking guns, electric scoops or adhesive sticks. And no waste from unused material left in caulking tubes or mastic cans that becomes brittle or hard. EZ Stic Pads are environmentally safe as they contain no VOCs.
EZ Stic Pads should be applied one pad per square foot. Install pads on wall. If extra thickness is needed to bridge irregularities, simply stack pads to desired height. A mechanical support system is needed and pressure must be used when setting the mirror. If a mirror needs to be removed, heat the surface of the mirror to 140° F (60°C) and pull from the wall with suction cups.
150 pads per case.