CRL Gray 1-1/2" Sof Rod - 102 ft Box
CRL Gray 1-1/2" Sof Rod | SR112C  | SR112C
Category: Just Arrived!
CRL Gray 1-1/2" Sof Rod - 102 ft Box
SKU: SR112C
UPC: 096523016871

$139.34 (20% off)

$116.12

Product Details:

Easily Conforms to Joint Irregularities
Non-Gassing if Damaged
No Moisture Absorption

CRL Sof® Rod is a state-of-the-art sealant backing material combining the best properties of both open and closed cell backer rods in a single, trouble-free product. Sof® Rod is a continuous length of extruded polyolefin foam made with a non-absorbent outer skin and a highly resilient interior network of open and closed cells. Sof® Rod will not out-gas if ruptured. It can be used in temperatures from -45º to 160º F (-43º to 71º C).

Diameter of Rod: 1-1/2 in (38 mm)
Feet per Package: 102 ft (31.1 m)

Package Contents: 17 pieces 6 ft long each

Oversized.
Ship at UPS Oversize Rate.

CRL Sof® Rod is basically an inert material, and therefore compatible both physically and chemically with virtually all known cold applied sealants, including self-leveling types like our CRL NoVa 300 SSL and CRL Tremco THC900. It provides superior performance for a wide range of expansion and contraction joint applications such as EIFS, glazing, curtainwalls, and parking decks. Sof® Rod fills the same joint dimensions as closed cell backer rod.

Proper installation includes the following. Verify that the joint is clean, moisture-free, and clear of obstructions. Use Sof® Rod in a diameter approximately 25% larger than the joint. Always install using a blunt tool or roller. The CRL Backer Rod Insert Tool Set T607CU605 is designed specifically for the smooth installation of all types of backer rods.

Important Note:
Do not tear, puncture, crease, over compress or stretch during insertion. Always use the correct size backer rod for the particular application. Do not use with hot applied sealants or hot melt adhesives where their surface temperature is over 160 degrees F (71 degrees C).

Oversized.
Ship at UPS Oversize Rate.