New Model Eliminates Small End Plate Covering
Hinge on Edge of Fixed Panel
Requires Holes in Fixed Panel and Cut-Out in Door
Use Monolithic Tempered Glass
The CRL Geneva 092 Series 90° Glass-to-Glass
Hinges replace the old style Geneva 090 Series 90° Glass-to-Glass Hinge
which required a cut-out in both the door and the fixed panel. This new style
requires only two holes (per hinge) in the fixed panel, and a cut-out in the
door.
Color: Brushed Nickel
Minimum Order: 1 Each
Additional Product Information:
After installation of the old style Geneva a small end plate was adhered to the
edge of the fixed panel. The new style eliminates the small end plate, leaving a
more aesthetic, uninterrupted glass edge for the fixed panel.
Standard Reversible Pivot Pin:
Each Geneva Hinge contains a Reversible Pivot Pin. One side of the Pin is marked
90°. The opposite side is marked 85°. Standard Geneva Hinges come with the 90°
side activated, which brings the door to the standard closing position. Offset
Models come with the Pin pre-set for 85° (5° tighter closure into shower
interior). The Pin can be rotated (not flipped upside down) to activate the
other side.
Specifications:
Glass Thickness: 3/8 to 1/2 inch (10 to 12 mm) Tempered Safety Glass
Construction: Solid Brass
Hinge Swings: 90º in and 90º out
Closing Type: Self-Centering when within 15º of closed position
Cut-Out Required
Includes: One Hinge, Gaskets, Screws and Template