CRL General Purpose Silicone Primer
Category: Just Arrived!
CRL General Purpose Silicone Primer
SKU: S1L2100
UPC:
Product Details:
- Promotes Adhesion to Coated Glass, Metal, Stone, Most Plastics,
and Masonry
EM>CRL S1L2100 Primer promotes adhesion of
certain one-part CRL Silicone Sealants to a variety of construction
materials such as coated glass, metal, stone, most plastics (no
polyethylene), and masonry.
Metal surfaces should first be cleaned with Methyl Ethyl Ketone
(MEK) to remove oil, grease, dirt and other contaminants, then
wiped dry with clean rags. Apply a uniform continuous film of
primer (approximately 400 square feet per gallon is recommended on
rough or porous substrates, 800 square feet per gallon on smooth
metal surfaces) avoiding excess of primer for best results. Allow
primer to air dry prior to applying sealant. Prime only as much
surface as can be sealed within eight hours or cleaning and
re-priming will be required.
- Contents of Container: 8 fl oz. (240 ml)
- Case Qty: 6
- Recommended Dry Time: 15 - 60 minutes