Product Details:
- Custom Manufactured to Your
Specifications
- Attractive and Easy to Install
- Available in Many Finishes
|
By using CRL Partition Posts with Shelf
Brackets, the top glass shelf can be continuously
supported by as many brackets as desired. No strips, plates or bars
on top of the glass, therefore, no hole drilling is required and it
is not necessary to slice shelves on every bracket. The top shelf
is held firmly at both the front and rear so that the shelf cannot
be accidentally raised or moved. Knife-edged brackets reduce
maintenance because there are no braces, rivets, screw heads or
other projections to gather food particles. When ordering
please specify:
- Post number
- Post height with air space
- Top shelf width up to 14 inches (350 millimeters) - use
increments of six inches (150 millimeters), eight inches (200
millimeters), 10 inches (250 millimeters), 12 inches (300
millimeters) and 14 inches (350 millimeters).
- Specify intermediate bracket width (if any): sizes are four
inches (100 millimeters), six inches (150 millimeters) eight inches
(200 millimeters). Also indicate the distance from the top of the
counter to the intermediate bracket.
- Indicate desired finish
- Indicate quantity of each type of bracket: left hand (open
end), right hand (open end), left hand (closed end), right hand
(closed end), Center.
Please note that a diagram of the desired post layout must
accompany each order. Determine the Right Hand and Left Hand posts
from the "clerk" side of the partition.