- Custom Manufactured to Your Specifications
- Attractive and Easy to Install
- Available in Many Finishes
|
By using CRL Partition Posts with Shelf Brackets, the top glass shelf can be continuously supported by as many brackets as desired. No strips, plates or bars on top of the glass, therefore, no hole drilling is required and it is not necessary to slice shelves on every bracket. The top shelf is held firmly at both the front and rear so that the shelf cannot be accidentally raised or moved. Knife-edged brackets reduce maintenance because there are no braces, rivets, screw heads or other projections to gather food particles.
When ordering please specify:
Post number
Post height with air space
Top shelf width up to 14 inches (350 millimeters) - use increments of six inches (150 millimeters), eight inches (200 millimeters), 10 inches (250 millimeters), 12 inches (300 millimeters) and 14 inches (350 millimeters).
Specify intermediate bracket width (if any): sizes are four inches (100 millimeters), six inches (150 millimeters) eight inches (200 millimeters). Also indicate the distance from the top of the counter to the intermediate bracket.
Indicate desired finish
Indicate quantity of each type of bracket: left hand (open end), right hand (open end), left hand (closed end), right hand (closed end), Center.
Please note that a diagram of the desired post layout must accompany each order. Determine the Right Hand and Left Hand posts from the "clerk" side of the partition.