Category: 4" Two Pocket Double-Sided Door Header
CRL Custom Color and Custom Length 4" Two Pocket Double Sided Door Header
SKU: DCH42DPTC
UPC:
Product Details:
- Available in 4" or 4-1/2" Widths for 3/8" or 1/2"
Glass
- Available in One or Two Pocket and as a Single or
Double Sided Header
- Available in Many Finishes
|
Many times installations dictate the need for a door, or pair of
doors, with sidelites on either side. In the past if you used a
Header on top for your Overhead Door Closers, you had to adapt a
different extrusion next to your Header to secure the top of the
sidelites. CRL has developed a snap-in insert with a glazing pocket
that snaps in on either side of the doors. This allows you to use
one continuous Header with the center fabricated for the doors, and
the sides fabricated for fixed sidelites. Glass is secured in the
extrusion with the provided Top Load Roll-in Gasket. To secure the
bottom of the fixed sidelites, use our UC38 Series "U" Channel. Contact us
at (888) 663-9830, Ext. 777, .