CRL Custom Brushed Stainless 3/4" Square by 1/4 in Thick Standoff Cap * CUSTOM MADE*
C.R. Laurence CRL Custom Brushed Stainless 3/4" Square by 1/4 in Thick Standoff Cap * CUSTOM MADE* | SCAP75CBS
Category: CRL 3/4" Square Cap Assemblies
CRL Custom Brushed Stainless 3/4" Square by 1/4 in Thick Standoff Cap * CUSTOM MADE*
SKU: SCAP75CBS
UPC:

Product Details:

MADE TO ORDER

ETA 3 Weeks from Date of the Order.

 

Uniquely Styled

Available in Several Popular Finishes

Use with 3/4" (19 mm) Square Bases or as Decorative Wall Fasteners

 

CRL 3/4" (19 mm) Square Standoff Cap Assemblies are easily installed with the Square Standoff Bases due to our exclusive design.

The secondary cap, with removable allen screw, has two flat sides which are used to secure the cap to the panel material. When firmly in place, the top cap is paced over the secondary cap, then aligned with the square base and held in position with undetectable double-sided tape. With this design there is no "adjustment" or "trial-and-error" required to line up the cap with the base.

Requires a 9/16" (14 mm) hole for assembly.

 

The complete assembly consists of: (1) square cap with double sided tape, (1) secondary cap, (1) 1/4"-20 x 1" allen screw, (1) clear plastic washer with sleeve, and (1) clear plastic washer.

 

Color:        Brushed Stainless

 

Width:       3/4 in. (19 mm) square

Thickness: 1/4 in. (6 mm)

 

MADE TO ORDER

ETA 3 Weeks from Date of the Order.