Use to Install 1/2" (12 mm) Cable System into
Concrete
When it becomes necessary to install the 1/2 inch
(12 millimeter) Cable System into concrete, the CRL Concrete Anchor has
an M6 threaded end which attaches through the Cover Disk into the cable end
fittings. The Concrete Anchor can be installed by drilling a 1/4 inch (6
millimeter) diameter hole 2 inch (51 millimeter) deep into the concrete. Tapping
the top of the Anchor with a hammer will securely fasten the Anchor into the
concrete.
Overall Length: 3-1/4 in. (82.2 mm)
Minimum Order: 1 Each