
Used with the Ringed Anchor Fitting When the Cable System is Mounted to a Concrete Wall Surface
Easy to Install
The CRL Cable Loop Securing Clamp for the Cable Display System is designed to be used with the CB78 Ringed Anchor Fitting and the CB116 Cable Turnbuckle. When the Cable Display System requires installation into a concrete surface, alternative anchoring fittings are necessary to securely hold the cables. The Cable Loop Securing Clamp is the integral link between the cable and either the Turnbuckle or the Ringed Anchor Fitting.
Width: 17/32 in (13mm)
Height: 23/32 in (18mm)
Additional Product Information:
One each clamp is the minimum order. (Cable shown not included)
Important Note:
WEIGHT LIMITATIONS: When properly installed, each column (4 cables) can bear a total weight of up to 80 lbs. (36kg.). Each shelf can bear a total weight of 20 lbs. (9kg.), when used with CB74, CB76 and CB78 Ceiling Mount Fittings.
If CB112 and CB114 Hanger Pipe Base Fittings are properly anchored and used as ceiling attachments, each column (4 cables) can bear a total weight of 40 lbs. (18kg.).