Category: CRL Transom Mounted Patch Connector with Two Reversible Door Stops
CRL Brushed Stainless Finish Transom Mounted Connector with Two Reversible Door Stops
SKU: PH70BS
UPC:
Product Details:

For 3/8" or 1/2" (10 or 12 mm) Glass
This CRL Sidelite Mounted Transom Patch Connector with
Reversible Door Stop is used to connect a sidelite and
transom together. It is usually used on the strike or swinging side
of the door. By simply turning the Reversible Door Stop around, you
have the choice of making the door swing in or out.
Color: Brushed Stainless
Minimum Order: 1 Each
Additional Product Information:
The connector can be used on one lite or two lite transoms, and
with the stops removed, can be used as a Connector only. When used
as Connector only, it is suggested that you turn the fitting around
so the notches in the Cover Plates face up, and are not
visible.
GLASS FABRICATION REQUIRED: Three 3/4 inch (19 millimeter) Diameter
Holes.