European 2-9/16" (65 mm) Pivot Setback
High Density Cast Body
Gaskets for use with 3/8" or 1/2" (10 or 12 mm) Glass
The CRL Top Door Patch Fitting includes the 1NT303 Insert for use with
our CRL9040WBP Top Walking Beam Pivot, 1NT401 Surface Mount Top Pivot, 1NT405
Threaded Top Pivot, or other 19/32 inch (15 millimeter) Diameter type pivots.
Finished covers are available in four standard finishes. Gaskets are supplied
that allow this Patch Fitting to be used with either 3/8 or 1/2 inch (10 or 12
millimeter) Glass.
Color: Brushed Stainless
Minimum Order: 1 Each
Additional Product Information:
Glass Fabrication Required: One 3/4 inch (19 millimeter) diameter hole and
corner notch.
Important Note:
THE FOLLOWING GUIDELINES ARE TO BE USED WHEN MAKING A DOOR USING THIS HARDWARE:
MAXIMUM HEIGHT: 108" (2744MM)
MAXIMUM WEIGHT: 176 LBS (80KG)
MAXIMUM WIDTH: 43" (1100MM)
IF THE DOOR EXCEEDS ANY OF THESE LIMITATIONS FULL DOOR RAILS SHOULD BE USED.