1/4" (6.3 mm) Profile
Use
RTV408C Clear Silicone
This CRL Low Profile Grid gives the
appearance of wood window grids. It has a .975 inch (24.8 millimeter) flat base
and a 1/4 inch (6.3 millimeter) high profile that is adhered to the glass
using either
Clear Silicone or
Transparent Very Hi-Bond Tape. It can be used by itself or in conjunction
with either low or high profile stepped grids, when the back side of a sliding
glass window does not have clearance to accept a stepped grid on both sides.
Color: Bronze
Length: 96 in (2.4 m)
Note: To produce a tight fitting joint it is
recommended that the grid be cut at a 30° angle.