CRL Brite Anodized Wide U-Channel With Top Load Roll-In Glazing Gasket for 3/8" and 1/2" Glass - 240" Long
C.R. Laurence CRL Brite Anodized Wide U-Channel With Top Load Roll-In Glazing Gasket for 3/8" and 1/2" Glass - 240" Long | NH2BA240
Category: CRL 240" Combination Wide U-Channel and Narrow Header for 3/8" and 1/2" Glass
CRL Brite Anodized Wide U-Channel With Top Load Roll-In Glazing Gasket for 3/8" and 1/2" Glass - 240" Long
SKU: NH2BA240
UPC:

$325.05 (20% off)

$270.88

Product Details:

Matches Width of Door and Sidelite Rails and Accepts Roll-In Gasket, Top Pivot Block and Flush Snap-In Insert
Available in Stock Lengths, Fabricated Headers, or Headers with Side Pockets for "Lift and Drop" Panel Glazing
Special Sidelite Rail Adapter Allows for a Continuous Sight Line Using the Sidelite Rail in Conjunction with the Narrow Header

This CRL Wide "U" Channel and Narrow Header was developed with three uses in mind: As a "U" Channel that would be the same width as our Sidelite and Door Rails; as a Narrow Header that is the same width as our Sidelite and Door Rails, and will accept a top free-swinging pivot to secure the top of the doors; as an Even Sight Line System, accomplished by first securing the fabricated Narrow Header to the top of the opening, then securing the Sidelite Rail to the Narrow Header with the 1/4 inch (6.3 millimeter) header saddle. All drilling, tapping and fabrication is done during the manufacturing process to save time and prevent the need for field fabrication.

Color: Brite Anodized

Length: 240 in (6.10 m)
Width: 1-5/8 in (41.3 mm)
Height: 1-7/8 in (47.6 mm)

Additional Product Information:
This product is manufactured as needed. Lead time of 1-2 weeks.