Product Details:
- Low Modulus, One-Component, Smooth Surface Type
Expansion Joint Sealant
- Available in Cartridges or Sausage Packs
- Available in Several Colors
|
CRL Tremco DyMonic is a high
performance, low modulus, one-component, moisture curing, modified
polyurethane sealant. DyMonic features a smooth, consistent surface
when cured. It requires no priming when used on most common
substrates, provided surfaces are dry, clean and free from
contaminants. It is supplied in a non-sag consistency which will
gun easily with conventional caulking equipment. DyMonic can be
used to seal dynamic moving joints in precast concrete panels,
curtainwall, and tilt-up panels. Also for expansion and control
joints, perimeter caulking of windows and doors, bedding of
mullions, frames and panels. It develops a strong adhesive bond
that will not deteriorate, and exhibits excellent weather
resistance. Its balance of properties (high strength, low modulus,
high recovery) makes it able to withstand moisture, shear and
deflection movement. DyMonic exhibits a tenacious adhesion which
will not diminish over product life. In order to help you better
select the correct sealant, we have put together a Silicone
and Sealant Selector Chart. You need to have Adobe Acrobat
Reader installed in order to view this chart. You can download this
Free software on the Adobe.com website by going HERE.
Available in both standard 10.14 fluid ounce (300 milliliters)
cartridges or 20.3 fluid ounce (600 milliliters) sausage packs.
Note: Sausage packs require the use of a sausage
load caulking gun, such as Cat. No. WG51001.
Technical Data: Meets the requirements of
Federal Specification TT-S-00230C, Type II, Class A, ±25%
Movement Capability; ASTM C 920-87, Type S, Grade NS, Class 25, Use
NT, M, A and O (granite).
Comparable Sealants:
CRL M64, CRL M66 Sealants
Tremco® Vulkem 116, Tremco® Vulkem 921, Tremco®
Vulkem 911, Tremco® Vulkem 931 Sealants
Sika 1A, Sika 15LM Sealants
Sonneborn® NP1, Sonneborn® Sonolastic 150 Sealants
Pecora® Dynatrol 1 Sealant
OSI® PR-255 Sealant
Schnee Morehead 7100 Sealant
Somaca One-Part Polyurethane Sealant
Bostik® Chem-Calk 900 Sealant
Some substrates may require priming, such as certain high
performance paints and architectural finishes. Painting over
DyMonic is not a recommended practice since paint may crack and
peel when joint movement occurs. Check cartridge label and
Specification Data Sheet for additional limitations.
- Shelf Life: 9 months
- Color: Beige
- Contents of Cartridge : 10.14 fl oz (300 ml)