- For Heating and Dispensing Hot Melt Butyl in Chip, Chunk or Slug Form
- Adjustable Temperature Control
- Use to Dispense N420LB Hot Melt Butyl
|
This CRL Aztech II Butyl Dispenser extrudes chunk, slug or chip form hot melt butyl sealants from a heated hopper-type pot that also serves as the body of the positive displacement extruder pump. The extruder pump is driven by a 1/2 horsepower motor mounted on a direct drive gear reducer that is coupled to the pump drive shaft by a double belt pulley. An internal screw auger moves material into the mouth of the pump. Heated 12 foot hose is steel braided and Teflon-lined with a spring guard to prevent excessive flexing. Separate rheostats for hose and pot range up to 400°F. Operates on 220 Volts.
Follow all manufacturer\'s instructions before operating this machine.