CRL 8300 Series Medium Duty 105 Degree No Hold Open Low Profile Floor Mounted Closers

The CRL Low Profile Floor Mounted Door Closers are preferred for many types of installations because they only require a shallow 1-9/16 inch (40 millimeter) depth cut out in the floor.

This is especially important on floors above the ground floor.

The shallow cut out leaves enough remaining floor under the Closer to support the weight of heavy doors.

The standard spindle collar height supplied with the Closer is 1/8 inch (3 millimeter). Spindles with other collar heights are available to accommodate different threshold and finished floor heights.

The closer has dual independent valves for closing operation, one valve for closing and one valve for latching.

Note: An auxiliary flora or overhead door stop is recommended to prevent possible damage to both the closer and entryway due to over-extension of maximum allowable door swing.

Specifications:

Maximum Door Weight: 264 lbs. (120 kg)

Maximum Interior Door Width: 42 in (1067 mm)

Maximum Exterior Door Width: 38 in (965 mm)