CRL 60" Category II Shatterproof Safety Tape for Mirrors
C.R. Laurence CRL 60" Category II Shatterproof Safety Tape for Mirrors | 2MT60
Category: CRL Aluminum Extrusions for Sliding Screen Door Openings
CRL 60" Category II Shatterproof Safety Tape for Mirrors
SKU: 2MT60
UPC:

$2,413.19 (20% off)

$2,010.99

Product Details:

Can not be ship by UPS, FedEx - Common Carrier Only.
Call toll free for shipping quote. 216-663-9830

 

 

Keeps Glass Fragments from Causing Serious Bodily Damage Should Mirror be Accidentally Broken
Easy to Apply and Ready to Use
Meets Specification 16 CFR1201 Impact Resistance

This pressure-sensitive, adhesive coated film tape is primarily recommended for mirrored Wardrobe (Closet) doors that require a CRL Category II Mirror Safety Backing. A woven scrim imbedded into the film for high tensile and impact strength also prevents moisture entrapment and scrim de-lamination. The high performance adhesive allows for easy roll unwind, yet promotes high bond to a wide variety of mirror backings. No failure when tested for impact resistance to 16 CFR1201.

Width of Tape:         60 in (1524 mm)
Linear Feet per Roll: 600 ft (183 m)
Thickness:               5 mil

Minimum Order: 1 Roll

Additional Product Information:
Physical Properties:
Film: Polyethylene
Tensile Strength (PSI): 6
Elongation(%): 550
Thickness: 4.5 mil (.0045" - .006")
Adhesive: Acrylic water based
Peel Adhesion: *18 oz.
*"PSTC-1" initial tack on stainless steel.

Application Instructions: For best results, tape should be applied with pressure roller application. Surface should be clean and free of oil and moisture. Apply at temperatures between 60 and 100 degrees Fahrenheit (16 and 38 degrees Celsius).