Strong Zinc Plated Steel for Large Door Installations
Pre-Cut For your Convenience
Easy to Install
This CRL Ball Bearing Roll-EZY Track Assembly is ideal for large door installations. This assembly is easy to install and, once installation is complete, the doors operate smoothly and efficiently providing years of reliable service. Can easily be cut down to fit opening. This Track Assembly is designed for use with 1/4 inch (6 millimeter) glass.
Extrusion Length: 48 in (1219 mm)
Minimum Order: 1 Each
Each assembly contains:
One piece KV993 Upper Channel Guide
One piece KV995 Shoe for Glass Doors
One and a half pieces KV997 Ball Bearing Carrier
One piece KV999 Lower Track
Note:
1. Allow a one inch (25.4 millimeter) opening for the width of the track, and
cut glass 1-1/4 inches (31 millimeters) shorter than the height of opening.
2. The Ball Bearing Carrier (KV997) should be 2/3 the length of the opening and
then centered under the Shoe. This will provide proper rolling action for the
door since the Ball Bearing Carrier travels at 2/3 the speed of the Shoe. The
length of the KV997 Ball Bearing Carriers supplied in this assembly is 28 inches
(711.2 millimeters).
3. The weight limitation for this Track Assembly is 50 lbs/ft.