Product Details:
3M™ Trizact™ Films - A Cleaner, Long Lasting Abrasive System for
Glass Scratch Repair
Starter and Professional Kits are Both Easy to Use
C.R. Laurence introduced 3M™ Trizact™ Abrasive
Film to the glass industry. This material uses natural
abrasive formed in the shape of small pyramids, and provides
uniform layers of abrasive throughout the pyramid. As abrasive
particles are exposed and used, they fall down and are flushed away
between the pyramids
Diameter: 3 in (76.2 mm)
Minimum Order: 1 Each
This easy-to-use system uses five grades to go from a fine ground
finish on glass to absolutely clear! It is perfect for scratch
removal, edge finishing and a variety of other applications. No
more messy slurries and contamination problems!
The potential for this material in your glass fabrication process
is amazing! For a small investment, you can purchase equipment and
supplies to remove scratches in flat and curved glass, and to
create your own finished products, including "high
polish" work.
3M™ Trizact™ will remove light or deep scratches, scuffs, wiper
marks, and stains on a variety of glass surfaces. Makes an old
windshield or table top look like new again!
3M™ Trizact™ should always be used wet, with plain water. Polish
requires using each grade long enough to remove all scratches from
the previous grade. If this is not done, small defects will remain
in the finished product. When using "high polish clear"
(cerium), work surface must be flushed with water between stages to
remove loose abrasive.