Category: 2-1/2" Diameter Standoff Display Systems
CRL 2-1/2" Diameter Custom Polished Stainless Standoff Base
SKU: S0B212CPS
UPC:
Product Details:
- Manufactured to Your Specification
- Available in Many Finishes
|
This CRL Custom Standoff Base matches
your Custom Cap, and is now available from the Manufacturing
Division of C.R. Laurence Co. As a result of customer requests for
special lengths and finishes of Standoff Products, CRL now provides
custom fabrication of 1/2 inch (12 millimeter), 3/4 inch (19
millimeter), one inch (25 millimeter), 1-1/4 inch (31 millimeter),
1-3/4 inch (44 millimeter) and two inch (50 millimeter) standoff
base and cap assemblies. Available Finishes : Polished Stainless,
Brushed Stainless, Satin Chrome, Polished Brass, Brushed Brass and
Standard Powder Coat Colors.
- Custom Standoff Bases:
If the overall length of the base is three inches (75 millimeters)
or less, the standoff will be drilled and tapped the entire length
of the base. If over three inches, the standoff will be drilled and
tapped at a depth of one inch (25 millimeters) on each end. The
thread size will be as follows: 1/2 inch (12 millimeters) is 10-24;
3/4 inch (19 millimeter) is 1/4-20; one inch (25 millimeter), 1-1/4
inch (31 millimeter), 1-3/4 inch (44 millimeter) and two inch (50
millimeter) is 5/16-18.
- Custom Cap Assemblies:
The standard thickness will be 1/4 inch (6 millimeters) unless
otherwise specified and will have a one inch (25 millimeter) screw
threaded to be compatible with the matching Standoff Base. Vinyl
washers are provided.
CRL Standoff Systems offer a complete
range of mounting accessories that you can order in any quantity
necessary for your project. For installation techniques or design
assistance using CRL Standoffs, contact the us at (888) 663-9830,
Ext. 777, .