|
HOME » Hand and Power Tools, Equipment, and Accessories » Electric and Power Tools » Powered Saws, Shears and Parts » Power Saws » d45ax
|
CRL 10" Fixed Double End 45 Degree Miter Saw
|
|
|
|
|
|
|
Part Number: |
D45AX
|
Our Price: |
$18,144.39
|
|
|
|
|
|
|
|
Wrong Quantity !
|
|
|
* To see your shipping charges click "View Cart" after adding your item to the shopping cart.
|
|
|
|
|
|
- Makes Two 45° Miters at One Time
- Engineered For High Production
This CRL Fixed Double End 45 Degree Miter Saw is popular because of its unique features and precision. Engineered for higher production, this double miter saw makes two 45° miters at one time, saving time and materials.
Standard Features and Specifications: Blade Capacity: 10 inches OD (254 millimeters) Saw blades not included Spindle & Pivot: Both mounted on pre-loaded and sealed ball bearings Arbor: 5/8 inch (16 millimeters) with 2-1/4 inch (57 millimeter) saw collars Iron Castings: Saw arm, pivot brackets and table are precision machined and ground with milled slots in table to guide pivot brackets and fences Motors and Voltages: 1-1/2 H.P. single phase 115/230 Volt and 3 phase 230/460 Volt, Totally Enclosed Fan Cooled Motors, 60 Hz, 3450 RPM with Dual Magnetic Starter Table Height: 34-1/2 inches (876 millimeters) from floor Floor Stand: Close coupled heavy gauge steel stand completely enclosed with six inches (152 millimeters) dust outlet. 1200 CFM required Blade Wear and Angular Adjustments: Each saw head has adjustments for blade variation. Allows for precision alignment of blades to minimize scrap. Saw heads are adjustable up to 3°, always assuring perfect mitres Length of Stroke Adjustment: The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular molding or extrusion. Saw heads reverse immediately, thereby saving time and motion Production Rate: The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut Size: Standard machine, without tables or gauges; Weight 550 pounds (250 kilograms); 46 inches (1168 millimeters) Wide x 22 inches (559 mm) front to back x 51-1/2 inches (1308 millimeters) High Actuation: Pneumatic foot valve with cover Air Pressure: 75 PSI (5.4 kg/cm2) with Air Filter/Regulator/Lubricator; includes Auto Drain Air Consumption: 1.0 CF per 10 strokes at 75 PSI (.043 cubic meters per minute at 5.4 kg/cm2)
|
|
|
|
Free Shipping
|
|
Please click on link to read about our Free Shipping Terms & Conditions.
|
|
|
|