Product Details:
- Manufactured to Your Specification
- Available in Many Finishes
|
This CRL Custom Standoff Base matches
your Custom Cap, and is now available from the Manufacturing
Division of C.R. Laurence Co. As a result of customer requests for
special lengths and finishes of Standoff Products, CRL now provides
custom fabrication of 1/2 inch (12 millimeter), 3/4 inch (19
millimeter), one inch (25 millimeter), 1-1/4 inch (31 millimeter),
1-1/2 inch (37.4 millimeter), 1-3/4 inch (44 millimeter) and two
inch (50 millimeter) standoff base and cap assemblies. Available in
these Stock Finishes: Polished Stainless, Brushed Stainless, Satin
Chrome, Polished Brass, Brushed Brass.
Also available in any Standard Powder Coat Colors on Custom
Order.
- Custom Standoff Bases:
If the overall length of the base is three inches (75 millimeters)
or less, the standoff will be drilled and tapped the entire length
of the base. If over three inches, the standoff will be drilled and
tapped at a depth of one inch (25 millimeters) on each end. The
thread size will be as follows: 1/2 inch (12 millimeters) is 10-24;
3/4 inch (19 millimeter) is 1/4-20; one inch (25 millimeter), 1-1/4
inch (31 millimeter),1-1/2 inch (37.4 millimeter), 1-3/4 inch (44
millimeter) and two inch (50 millimeter) is 5/16-18.
- Custom Cap Assemblies:
The standard thickness will be 1/4 inch (6 millimeters) unless
otherwise specified and will have a one inch (25 millimeter) screw
threaded to be compatible with the matching Standoff Base. Vinyl
washers are provided.
CRL Standoff Systems offer a complete
range of mounting accessories that you can order in any quantity
necessary for your project. For installation techniques or design
assistance using CRL Standoffs, contact the us at (888) 663-9830,
Ext. 777, .