Category: CRL Translucent Acrylic Very Hi-Bond Adhesive Tape
CRL 1/4" x .020" Transparent Acrylic Very Hi-Bond Adhesive Tape - 7 ft
SKU: AT0201408
UPC:
Product Details:
Excellent for Use with Glass or Clear Polycarbonates, Seals and
Wipes Used in Frameless Shower Installations
Water Clear and Attains Full Strength in 72 Hours
Flexible, Foldable, Moldable and Compressible
Will Not Harden or Become Brittle With Age
Our CRL Transparent Acrylic Very Hi-Bond Tape is
used in adhesive applications involving glass or other clear
materials, making it ideal for adhering clear polycarbonates, edge
wipes and seals used in frameless shower installations.
Other applications include skin-to-frame assemblies, furniture,
appliances, auto trim attachment, window grids, signs, graphics,
construction uses to replace mechanical fasteners and welds, and
whenever a waterproof bond in a wide range of temperature
conditions exists.
Color: Transparent
Thickness of Tape: .020 in (.5 mm)
Width of Tape: 1/4
in (6 mm)
Length of Tape: 7 ft
Additional Product Information:
This tape possesses a uniform high-tack acrylic adhesive on both
surfaces, and will bond to most clean, dry, oil-free substrates. It
is non-staining after aged contact, has a solid composition for
clean cutting, and is flexible, moldable and compressible, so it
can conform to intricate shapes. CRL Very Hi-Bond Adhesive Tapes
can be applied at 50 to 100 degree Fahrenheit (10 to 38 degree
Celsius), and will maintain their adhesion at sub-zero
temperatures. After application, the bond strength will increase as
the adhesive flows onto the surface. At room temperature,
approximately 50 percent of the ultimate strength will be achieved
after 20 minutes, 90 percent after 24 hours, and 100 percent after
72 hours. The speed can be increased by raising the temperature to
150 degree Fahrenheit (65.5 degree Celsius) for a period of one
hour. Its solid acrylic core gives it superior strength, and allows
for clean cuts.