Product Details:
Dymonic FC Fast Curing, Low Modulus, Silane End-Capped,
Polyurethane Hybrid Sealant
Fast Skinning, Low Modulus, One-Component, Smooth Finish
Polyurethane Joint Sealant
Fast Skin Time, Less Dirt Pick Up
Available in Several Colors
Tremco Dymonic® FC is a low modulus,
one-component, moisture-cure, polyurethane hybrid sealant.
Formulated with proprietary silane end-capped polymer technology,
Dymonic FC provides the best performance
characteristics of polyurethane and silicone sealants.
Dymonic FC is a durable, flexible, sealant that
offers excellent performance in moving joints and exhibits
tenacious adhesion once fully cured. Typical applications for
Dymonic FC include expansion and control joints, precast concrete
panel joints, perimeter caulking (windows, door, panels), EIFS,
aluminum, masonry & vinyl siding.
Dymonic FC is fast curing with a skin time of
60 minutes and a tack-free time of 3-4 hours to significantly
reduce dirt pickup. It will not green crack due to early movement
and has an exceptional movement capability of +/– 35%. Dymonic FC
is also low VOC, paintable and will not crack or craze under UV
exposure.
Color:
Aluminum Stone
Contents of Cartridge: 10.1 fl oz (300 ml)

Tremco Dymonic FC
Color Chart
Joint Design: Dymonic FC may be used in any vertical or
horizontal joint designed in accordance with accepted
architectural/engineering practices. Joint width should be 4 times
anticipated movement, but not less than 1/4” (6.4mm).
Joint Backing: Closed cell backer rod or
reticulated polyethylene backer rod is recommended as joint
backing to control sealant depth and to ensure intimate contact of
sealant with joint walls when tooling. Where depth of joint will
prevent the use of backer rod, an adhesive backed polyethylene tape
(bond breaker tape) should be used to prevent three-sided adhesion.
All backing should be dry at time of sealant application.
Technical Data: Meets U.S. Federal Specification
TT-S-00230C, Type II, Class A; Canadian standard
CAN/CGSB-19.13-M87; and ASTM C 920, Type S, Grade NS, Class 100/50,
Use NT, M, A and O.
Limitations: Do not apply Tremco Dymonic FC over damp or
contaminated surfaces. Use with adequate ventilation. Do not use
under polyurethane deck coatings unless the sealant is fully cured.
Always utilize the accompanying MSDS for information on Personal
Protective Equipment (PPE), and health Hazards.