Zenex RTV Silicone Gasket Makers use a
single component, room temperature vulcanizing silicone. When applied
as a form-in-place gasket, it reacts with moisture in the air and cures to a
FEATURES AND BENEFITS
100% RTV Silicone. Industrial strength. Caulks around tubs, sinks, showers.
Temperature range from -60 F to 650 F. Insulates electrical components. Seals around windows, doors, walls. Binds most materials,
similar or dissimilar (glass, wood, metal, rubber, plastic, ceramics, etc.)
APPLICATIONS AND USES
Zenagasket will adhere to clean metal, glass, most types of wood, silicone
resin, vulcanized rubber, ceramic, natural and synthetic fiber as well as
and plastic surfaces. Forms in-place gaskets for oil and transmission pans, oil
and water pumps, valve and timing chain covers, electric motors and electric
control boxes, gear boxes, compressors, machine covers.
DIRECTIONS FOR USE
Surface must be clean, dry and free of oil, tar, dirt, and dust for best
adhesion. Hold can at 45o angle and apply a continuous bead of 1/16" to 1/8" to
the mating surface, encircling all bolt holes. For adhesion to both parts,
assemble immediately. One part adhesion, allow 10 to 15 minutes for bead to
skin. Assemble parts, but do not squeeze gasket out by over tightening bolts.
Starts to cure immediately, fully cures in 24 hours and reaches optimum strength
in 7 days. Leave a small bead of material which will form a sealing "plug" for
reuse. To use, gently pull "plug" and begin to use material. If plug breaks
leaving the dispensing tip sealed, use a paper clip or other wire object to
and loosen the remainder of the cured material.
SIZE / AVAILABILITY
Net Weight 8.75 oz.
6 per case
PRODUCT CANNOT SHIP VIA ANY TYPE OF AIR TRANSPORT, INCLUDING UPS NEXT DAY AIR,
UPS 2ND DAY AIR, UPS 3 DAY SELECT, FEDERAL EXPRESS, PRIORITY MAIL, ETC.
THIS PRODUCT MUST SHIP VIA GROUND TRANSPORTATION ONLY!!!