Moderately Fast-Setting Solvent Cement for Bonding
WELD-ON 4 is a water-thin, somewhat flammable cement formulated to quickly develop very clear and high strength bonds for many thermoplastic substrates. The bond is achieved by first softening the surfaces to be joined and then fusing them together with the dissipation of the solvent. The initial
bond forms within a matter of minutes and is followed by a significant and continual increase in bond strength over the next several hours. WELD-ON 4 may be preferred by some plastic fabricators because it is less likely to leave white marks (commonly called blushing). For similar applications but faster
setting cement, WELD-ON 3
Weld-On 4 Acrylic Adhesive water thin, somewhat flammable, moderately fast-setting, blush-resistant solvent cement for bonding acrylic. It will also bond with other thermoplastics such as polystyrene, CAB (cellulose acetate butyrate), and polycarbonate to themselves.
Does not bond to cross-linked acrylics.
WELD-ON 4 is formulated as a blush-resistant cement for bonding acrylic (poly-methyl methacrylate) to itself. It will also form strong bonds with other
thermoplastics such as polystyrene, CAB (cellulose acetate butyrate), and polycarbonate to themselves. It is not recommended for cross-linked acrylic.
SUGGESTED BONDING APPLICATIONS:
WELD-ON 4 is used extensively in sign fabrication for cementing acrylic letters to fat acrylic presentation panels and trim-capping of cut out acrylic letters. Strong butt joints are made with fat sheets by using the soak method. WELD-ON 4 is also widely used in many applications e.g. fabrication of display and presentation cases, medical equipment assembly, the bonding of plastic containers and pre-forms, and in the manufacture of numerous solvent welded structures and subassemblies using the capillary method.
Contents of Can: 1/4 pint (4 fl oz )
Ship Via: Hazardous Material - No Air Shipments
Additional Product Information:
The optional 1-1/4 fluid ounce (37 milliliter) oval polyethylene squeeze-type
applicator bottle with a 1-1/2 inch (38 millimeter) stainless steel needle,
is ideal for precision cementing, solvent dispensing, and oiling.
PRODUCT CANNOT SHIP VIA ANY TYPE OF AIR TRANSPORT, INCLUDING UPS NEXT DAY
AIR, UPS 2ND DAY AIR, UPS 3 DAY SELECT, FEDERAL EXPRESS, PRIORITY MAIL, ETC.
THIS PRODUCT MUST SHIP VIA GROUND TRANSPORTATION ONLY!!!