The Lightest, Most Portable Glass Drill Available.
Uses Your Cordless or 110 Volt Corded Drill w/GFCI.
Uses Any Plated Diamond Drill With a 3/8" Shank.
Just Use Your Own Wood's 8" or 9" Vacuum Cup.
CRL revolutionizes onsite drilling with tomorrow's technology.
The all new CRL Port-O-Holer Glass Drilling Tool drills holes up to 2" in diameter in glass and mirror, regardless of the location.
All you need is your own Wood's 8 or 9 inch Vacuum Cup and a cordless or 110V power drill w/GFCI, and you are ready to drill.
Never has there been a tool that is so simple and economical, yet so accurate and easy to use.
Length: 10 in (25.4cm)
Width: 5 in (12.7cm)
Additional Product Information:
Just place the Port-O-Holer where you want to drill your hole and pump the vacuum cup to hold it in place. There are center reference marks inscribed on the outside of the drill housing for easy lineup of your holes. Then just fill the drill housing with coolant using the included water bottle, and you're ready to drill. The built-in gasket seals the housing to your glass for leak-free drilling.
The Port-O-Holer does the same job as portable drilling machines, but costs less and is easier to transport to your job site. This tool holds to the glass better than any machine has in the past. The frame has been designed to work with any Wood's 8" or 9" Vacuum Cup.
The CRL PH2 Port-O-Holer comes complete with quick-disconnect, two allen wrenches, replacement seals, 8 ounce bottle of diamond tool coolant, drill shank adapter, two replacement bushings, and a protective cover for the vacuum cup.