LOCTITE 352 is a single component, high viscosity structural adhesive, it may be cured by UV light, heat or an activator, it is tough, flexible and highly resistant to vibration and impact forces.
Clear/light amber color structural adhesive with UV, heat and activator cure. Creates a tough, flexible bond resistant to vibration and shock.
LOCTITE 352 is suitable for bonding a wide range of materials. When cured, it is highly resistant to vibration and impact forces. LOCTITE 352 is used to bond, seal or coat metal and glass components in industrial applications. Typical uses include unitizing electrical devices, appliance parts and decorative components.
Typical Use:
Used to bond, seal, or coat metal and glass components in industrial applications. Typical uses include unitizing electrical devices, appliance parts, and decorative components. Key substrates are glass and metal.
Heat Cure
This product may be cured with heat. The bond area should be heated to 121°C and maintained at that temperature for 30 minutes.
Activator Cure
This product may be cured with an activator. Apply Activator 7075 to one surface and the adhesive to the other, mate and clamp. The assembly will reach handling strength in approximately 4 minutes if the gap is small, full cure in 72 hours
Specifications:
Clarity/Color: Clear/light amber
Cure Type: Ultraviolet, heat, activator
Key Substrates: Glass, metal
Viscosity, cP: 19,500
Elongation at Break, %: 290
Shore Hardness: D 60
Temperature Range: -65°F to 300°F
*****WARNING!*****WARNING!*****WARNING!*****WARNING!*****WARNING!*****WARNING!
Hazardous Material - No Air Shipments.
PRODUCT CANNOT SHIP VIA ANY TYPE OF AIR TRANSPORT, INCLUDING UPS NEXT DAY AIR,UPS 2ND DAY AIR, UPS 3 DAY SELECT, FEDERAL EXPRESS, PRIORITY MAIL, ETC.
THIS PRODUCT MUST SHIP VIA GROUND TRANSPORTATION ONLY!!!