For Use With 1/4" (6 mm) Glass
The CRL Frameless Hinge KD Door Kit allows the look of heavy glass, while lowering cost by utilizing 1/4 inch (6 millimeter) thick glass (not included).
Requires Only Two Holes in Glass
The hinges are applied through a one inch (25.4 millimeter) hole that is placed 1-1/4 inches (31.8 millimeters) from the edge of the glass.
Minimum Order: 1 Each
The hinges feature a molded nylon insert that allows a 3/16 inch (4.8 millimeter) horizontal adjustment each direction. This design holds the glass firmly without relying on clamp pressure to maintain position.
The Kits include hinge jamb assembly with hinges and fin seal attached, a "slip over the edge" handle that includes an integral magnetic latch, seals for around the door, and a hardware package.
Kits are available in three finishes, and in two heights. Maximum door width is 36 inches (914 millimeters).
Glass Thickness: 1/4 Inch (6 millimeter) (NOT INCLUDED)
Closing Type: Manual Close, Magnetic Close
Maximum Sizes: Width: 36 Inches (914.4 millimeters) Height: 72 Inches (1,828.8
millimeters) (Use Two Hinges Only)
Fabrication: Two, One Inch (25.4 millimeter) Holes Required, 1-1/4 Inches (31.8
millimeters) from Edge of Glass
Kit Includes: Hinge Jamb Assembly with Hinges and Fin Seal Attached, Magnetic
Handle, Door Seals, Hardware Package and Instructions