Allows Hinge to be Mounted Into Header
This CRL Adapter Block is commonly used with the Prima (not Junior or Senior series), Shell and Rondo Series of hinges. The Adapter Block allows the hinge to be mounted directly into the shower header assembly and can be adjusted sideways to any position required. The Adapter Block has a clearance notch which allows it to fit under the wall bracket when the hinge is mounted close to a wall.
Fits Prima, Shell and Rondo Series Pivot Hinges
Available in Several Finishes
A drilled 3/16 inch (5 millimeter) hole in the header is required for installation and the hinge base plate must be removed to mount the hinge to the header.
Length: 3-1/2 in (87 mm)
Width: 1/2 in (12 mm)
Minimum Order: 1 each
Each adapter block is individually packed with a screw.